Machining Equipment List

CNC Mill Turn

Mori Seiki NT 4300/1500SZM

  • 5 axis 2 chucks (15”) 100 Tool Changer
  • 28.7” swing x 59” between centers
  • Lower turret w/live tools & gear hobbing
  • 3.50 Bar Capacity

CNC Mills

Yasda YMC 430 Micro Center

  • Linear Motor Drive
  • Travel: X-420mm Y-300mm Z-250mm
  • 40,000 RPM spindle
  • 90 Tool Capacity
  • Thermal distortion stabilizing system

Toyoda 630S, HMC

  • 4 axis 2 pallet 60 Tool Changer
  • X1000mm x Y850 x Z750 Travel
  • 39.37” x 33.46” x 29.52” Travel
  • 15,000 rpm Spindle

Matsuura H Plus-630

  • 4 axis 2 pallet 90 Tool Changer
  • X1050mm x Y920 x Z990 Travel
  • 41.3” x 36.2” x 38.97” Travel
  • 12,000 rpm Spindle

Matsuura H Plus-300 PC5, HMC

  • 4 axis 5 pallet 90 Tool Changer
  • X500mm x Y560 x Z500 Travel
  • 19.50” x 22” x 19.50” Travel
  • 20,000 rpm Spindle

Matsuura MC-760VCD

  • Dual Spindle 3 axis 25 Tool Changer
  • 45” x 16” x 19.1” Travel

(3) Mori Seiki Dura Vertical 5100

  • 3 axis 30 Tool Changer
  • 41.3” x 20.9” x 20.1” Travel
  • 12,000 rpm Spindle

Fanuc RoboDrill

  • 3 axis 21 Tool Changer
  • 19.7” x 15.75” x 13” Travel
  • 24,000 rpm Spindle

Kitamura Mycenter 3XiF VMC

  • 3 axis 30 Tool Changer
  • 30” x 18” x 18.1” Travel
  • 20,000 rpm Spindle

Cincinnati Milacron Lancer 2000 VMC

  • 3 axis 30 Tool Changer
  • 30” x 80” x 30” Travel

Cincinnati Milacron Lancer 1250 VMC

  • 3 axis 30 Tool Changer
  • 30” x 50” x 30” Travel

Monarch VMC-75B

  • 3 axis 40 Tool Changer
  • 40” x 20” x 24” Travel

Fadal VMC 8030HT

  • 3 axis 21 Tool Changer
  • 80” x 30” x 35.5” Travel

Fadal VMC 4020

  • 3 axis 21 Tool Changer
  • 48” x 20” x 20” Travel

Haas VF-2SS

  • 3 axis 25 Tool Changer
  • 30” x 16” x 24” Travel

Haas VF-3 VMC

  • 4 axis 20 Tool Changer
  • 40″ x 20″ x 25″ Travel

Haas VF-2 VMC

  • 4 axis 20 Tool Changer
  • 30″ x 16″ x 20″ Travel

TRAK DPM

  • 31″ x 17″ x 23.5″ Travel

TRAK FHM 7

  • 60″ x 23″ x 20.5″ Travel

CNC Lathe

Mori Seiki NZX2000/800SY2

  • Twin Spindle 8″ chucks or 2.5″ Collet
  • Dual turrets with live tooling and Y axis movement
  • 48″ bar feeder

Mori Seiki NL3000Y/700

  • 16” Swing 29″ Between Centers
  • Live tooling with Y axis movement

Daewoo Puma 300

  • 14.5” Swing 51.1 Between Centers
  • Bar Puller

TRAK TRL 2470SX

  • 24” Swing 70” Between Centers

Hardinge Talent

  • 10/78 9” Swing 40” Between Centers

Nardini Fast Trace 220

  • 16″ Swing 40″ Between Centers

CNC Inspection

CRYSTA-Apex S 123010 R

  • 1200mm x 3000mm x 1000mm
  • REVO 5-axis scanning probe head

VIEW Benchmark 250

  • 300mm x 150mm x 150mm
  • QVI Rainbow Probe

EDM

Fanuc Robocut 1ie (Wire)

  • 23.6″x15.7″x16.2″ U/V ±3.937″

Elox HRP 104 (Plunge)

  • 20″ x 48″ Tank
  • 50 Amp

Elox HRP 64 (Plunge)

  • 20″ x 30″ Tank
  • 50 Amp
MoriSeiki NZ