Fabrication Equipment List

Water-Jet Machining Centers

  • Omax 4′ x 8′ Cutting Envelope 60,000 PSI
  • Flow IFB w/dynamic cutting and contour follower, 6′ x 12′ Cutting Envelope 92,000 PSI

Plate and Sheet Forming

Press Brake – Wysong FAB60-180 x 12′ + 24″ horn

  • Capacity 1/4 x 10′ to 3/16″ x 12′ Mild steel maximum.
  • Acute angle, hemming, box dies to 3/16″.

Press Brake – Cincinnati 300H x 12′

  • Capacity 1/2″ x 8′ to 3/8 x 12′ Mild steel maximum.
  • Acute angle, hemming, box dies to 3/16″, urethane forming die.

Press Brake – Di-Acro 16 X 96, Capacity 1/4″ x 8′

Cincinnati Model 4310 Mechanical Squaring Shear

  • Mild Steel: 1/2″ thick x 10’0″ long
  • Stainless Steel: 3/8″ thick x 10’0″ long

Rolls-Montgomery RS10-11

  • 1/2″ HR Plt x 10’0″ length to 18″ dia. min.
  • (3) 11″ dia rolls

Rolls (Peck, Stowe & Wilcox 418F)

  • 16 gauge x 48″ length

Rolls (Peck, Stowe & Wilcox 382D)

  • 22 gauge x 30″ length

Welding

  • 450 Ampere Miller Pipe Pro RMD/ProPulse TIG / GMAW / GMAW-P / GMAW-S (modified)
  • 450 Ampere Miller Axcess RMD and ProPulse CVDC GMAW
  • 450 Ampere Miller Deltaweld 451 CVDC GMAW
  • 450 Ampere Miller MP-450E CVDC GMAW
  • 300 Ampere Miller Synchrowave ACDC SMAW GTAW
  • 300 Ampere Miller 300A/BP ACDC SMAW GTAW
  • 300 Ampere PowCon Inverter CVDC SMAW GMAW
  • 300 Ampere Miller Trailblazer 44D Portable Diesel AC\DCSMAW GTAW w\Remote High Frequency and WaterCooler.
  • 250 Ampere Miller Dialarc HF ACDC SMAW GTAW
  • 250 Ampere Miller Dialarc HF-P ACDC SMAW GTAW
  • (2) 250 Ampere Miller Trailblazer 250G Portable Gas AC\DC SMAW SMAW GTAW GMAW w/ Remote GMAW wire feeders
  • 225 Ampere Miller Thunderbolt CCAC SMAW
  • (4) 200 Ampere Miller MM-200 CVDC GMAW
  • (3) 250 Ampere Miller MM-250 CVDC GMAW
  • 200 Ampere Miller CP-200 CVDC GMAW
  • 90 Ampere Miller Sidekick CVDC SMAW

Spot Welding

  • Taylor/Winfield 50 KVA 13.5″ throat x 4″ Gap.

Tube and Bar Forming

  • Wrap Bender, PINES #2 SERIES 112 ι3″ x 0.109 wall round tubing , 2″ pipe, ∼2-1/2″ square tubing 12″ max radius x 180 deg bend.
  • Ram Type Bender, capacity 1″ dia. x 11 ga. TW Tubing 90 deg. bend
  • One Shot Bender (Enerpac B-340) 1-1/4″ to 4″ tooling for 3/4″ – 2″ hydraulic tubing.
  • Hossfeld Bender #2 – Angles to 2 x 2 x 3/16, Flats to 1/2 x 4 1/2, Bar to 1 1/4 round or square, Pipe & conduit to 2″

Oxy-Fuel Cutting

  • Koike PLP 2000 with KAR CNC X Control2 Flame Torches, 6′ x 12′, 8″ Max thickness, up to 400 ipm cutting speed.

Plasma Cutting

  • Plasma Cutting Machine, 100 Amp Hypertherm PowerMax 1650 G-3, 3/4″ Steel, 1″ Aluminum, 3/4″ Stainless
  • Plasma – Thermal Dynamics, Cutmaster 40 Amp 1/2″ thk.

Thermal Spray Coating

  • Eutectic/Castolin Model B Torch

Panel Sander

  • Costruzioni Panel Sander 34″ x 112″ x 8″ 100lb Cap.

Wide Belt Sander

  • AEM, Model 137-1HPM 37″ wide

Hardware Insertion

  • Phillips/Haeger 618 Plus (6 ton capacity, 18″ throat depth)

Iron Worker

  • Geka Hydraulic, 100SD-24 110 Ton, 24″ throat with Coping Attachment Punch-1 3/8″ dia. thru 7/8″ thick PL, 4″ Max. dia thru 1/4″ Bar Shear-1″ Max Thick (16″) x 24″ Max Width Auto Cycle

Band Saw

  • Hyd-Mech, S-25 w/Auto cycle hydraulic feed
  • Capacity: Rounds: 18″
  • Rectangular or structural shapes: 18″ x 27″
  • Miter cut to 60 deg., 10 hp Blade Drive

Angle / Bar / Shape Rolling

  • Buffalo, Angle: 3″ x 3″ x 3/8″, Bar 1″ x 6″, Pipe: 2″ Sch 40 pipe 5 BROCH-09 corrected.doc 9/9/2009

Painting / Cleaning / Blasting

  • Paint Room * Binks * 14’w x 26’l x 9’h capacity
  • Paint Booth 10’w X 10’l X 9’ h capacity
  • Ransburg Electrostatic Painting System No 2 gun 100 KV REA IV 60 KV to 95% paint utilization.
  • Abrasive Blast Room *Empire* 650 System 15’w x 40′ l X 12′ h capacity. Environmental systems and automatic media recovery.
  • Abrasive Blast Cabinet *Empire* Glass Bead Pressure System 48″‘l x 36″ w X 30″ h capacity